IPカメラ Digital Home Systems HiWatchのPDF セットアップをオンラインで閲覧またはダウンロードできます。Digital Home Systems HiWatch 3 ページ。

1. Set cameras positioning, this can be done by removing the cover from the camera using a screw driver and then

adjusting the cameras angle to suit your needs. (Ensure the cover is back in place before beginning step 2)

2. Install the SADPTool software that comes with the Camera on the disk onto your computer.

3. Connect your camera to a power supply and your router via an Ethernet cable, the camera also supports PoE

(Power over Ethernet).

4. Load up the SADPTool software and select your camera from the list, you will need to activate the camera and you

will be prompted to create a password for the device.

5. Once set-up has been complete you will be able to access your camera via the IP that has been assigned to the

device, if you selected DHCP upon set-up you will need to access your router via a web browser and locate the

section of your router that shows connected devices to find the IP.

1. Open up your Vera UI and selected devices and go to add devices, enter 'IP Cam' into the search bar then scroll

down and select Generic IP Camera wizard.

2. Skip thought steps 1-3 and select Manually install the camera.

HiWatch IP Camera Set-up

VERA Integration (UI7)