- ページ 31

洗濯機 Siemens IQ 100のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Siemens IQ 100 43 ページ。
Siemens IQ 100 にも：マニュアル (8 ページ), 取付・使用説明書 (16 ページ), 取扱説明書 (12 ページ), クイック・リファレンス・マニュアル (2 ページ)

ページを印刷する

Fault

The washing has not

been spun correctly.

Spin result unsatisfactory. The Single rinse or Single spin programme selected maximum spin

Spin cycle actuated

several times.

The programme takes

longer than usual.

Washing result not

satisfactory.

Detergent residue on the

washing.

Grey residue on the

washing.

Cause

Large laundry items have become

entangled and are not evenly

distributed in the drum.

For safety reasons, the high speed

final spin cycle was automatically

cancelled.

speed: see page 18.

Not a fault.

Unbalanced load detection system is attempting to compensate the

imbalance by spinning the washing several times.

Not a fault.

Imbalance compensation system

attempts to balance the laundry by

repeated distribution.

The foam detection feature has

activated an additional rinsing cycle

to reduce the amount of foam.

Soiling is greater than expected or

recommended load has been

exceeded.

Detergent was underdosed.

Some phosphate free detergents

contain water insoluble residue

which may appear as light stains on

the washing.

Soiling caused by ointment, grease

or oil.

If the fault recurs, call customer service, see page 32.

Remedial action

Always load large and small items

together into the drum. (see also

imbalance compensation system).

Wash large and small items

together in order to reduce the

imbalance.

Adjust the detergent dosage for the

next wash cycle.

Select suitable programme and

press the Intensive Wash button or

reduce load.

Dose detergent according to the

manufacturer's instructions.

Select Single rinse immediately

brush out the washing after drying.

Select maximum detergent dosage

and maximum permitted tempera

ture for the next wash cycle.