- ページ 15

洗濯機 Siemens Viva WW10A00GBのPDF 取付・使用説明書をオンラインで閲覧またはダウンロードできます。Siemens Viva WW10A00GB 20 ページ。

ページを印刷する

Minor faults with simple solutions

Repairs necessary in the electrical appliances will only be able to be performed by electricians or

specialist technicians. Repairs carried out incorrectly may be highly dangerous or seriously harm

the user.

Malfunction

The function indicator does not come

Electrical power failure

The wash cycle does not start

Water is not visible in the drum

Washing result is unsatisfactory

Foam comes out of the detergent dra

wer

Foam is visible after the final rinse

Strange motor noises

Pump noises

The machine vibrates when washing

or spinning

The appliance does not spin or does

not empty the water used

The door will not open

Water does not enter the washing

machine

All indicators flash

All manuals and user guides at all-guides.com

Possible cause / Remedy

The machine's plug is not connected or not properly connected

to the socket. The fuse has blown. Electrical power failure.

In the event of a power failure or appliance malfunction,

emergency draining is possible, so that the laundry can be

removed from the machine; see «Cleaning the drainage pump»

The «

» button has not been pressed. The door is not properly

M-wash

closed («

This is not a malfunction. There is water in the appliance but it is

beneath the visible area. The electronic control reduces con

sumption mantaining all the features.

Abnormally high degree of soiling. Insufficient detergent. Measu

re out the detergent in line with the manufacturer's instructions.

Select the most suitable wash programme for the laundry.

Too much detergent has been used. Disconnect the appliance for

5 10 minutes. To prevent the build-up of foam, put a dessert

spoon of softener mixed with half a litre of water in the detergent

drawer. Reduce the amount of detergent used in your next wash.

Some detergents produce a large quantity of foam although this

has no effect on the rinsing result.

This is not a malfunction. During the heating stage, the motor pro

duces noises characteristic of starting.

This is not a malfunction. These noises are characteristic of the

machine starting and the pump discharging.

The transport securing devices have not been removed. Note the

installation instructions. The adjustable feet on the machine were

not fixed during installation. Place the machine and fix the feet ac

cording to the installation instructions.

The outlet pump is blocked, see «Cleaning the drainage pump»; the

outlet pipe is bent or blocked («K» and «

in both cases).

The safety feature is activated. The option «

selected.

The tap is turned off. The water inlet filters are dirty («

spin-m

and «

» indicators flash); see «Cleaning the filters in the water

inlet».

Security protection activated. Close the inlet tap and contact the

After Sales Service.

» and «K» indicators flash).

spin-m

» indicators flash

rinse hold

» has been

M-wash