- ページ 20

洗濯機 Siemens Washing machineのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens Washing machine 28 ページ。 Washing machine
Siemens Washing machine にも： インストレーション＆メンテナンスマニュアル (10 ページ), 取扱説明書 (8 ページ), 取付説明書 (6 ページ), 取扱説明書および取付説明書 (28 ページ), クイック・リファレンス・インストラクション (2 ページ), クイック・リファレンス・インストラクション (2 ページ), クイック・リファレンス・インストラクション (2 ページ), 取扱説明書および取付説明書 (28 ページ), 取扱説明書 (28 ページ), 取付説明書 (6 ページ), 取扱説明書 (10 ページ), クイック・リファレンス・インストラクション (2 ページ), 取扱説明書 (10 ページ), 取扱説明書 (10 ページ)

ページを印刷する
Siemens Washing machine 取扱説明書
en
... when the appliance
is switched on
The appliance does not start.
The mains fuse has tripped.
The appliance plug has not been
inserted.
The appliance door has not been
shut properly.
The tap has not been turned on.
The filter on the water supply hose
is blocked.
Switch off the appliance and pull
out the mains plug. Turn off the
tap. Then clean the filter which is
situated at the connection of the
supply hose. Finally, restore the
power, turn on the tap and switch
on the appliance.
... with the appliance itself
Lower spray arm rotates with
difficulty
Spray arm is blocked by small
items or food remains.
Lid in detergent compartment
cannot be closed
Detergent compartment has been
overfilled.
Mechanism is clogged with
remnants of detergent.
Indicator lamps do not extinguish
after washing has finished.
Indicator lights flash after
the programme has started.
No programme selected.
Indicator lamps do not extinguish
after washing has finished
Main switch is still set to ON.
20
Remnants of detergent stuck inside
dispenser
Compartment was damp when it
was filled up with detergent.
Compartment must be dry before
detergent is added.
"Check water supply" display
lights up.
Tap turned off.
Water supply interrupted.
Filter in the water supply blocked.
Supply hose kinked.
Water remains inside appliance
after programme has ended
Blockage or kink in drainage hose.
Pump is jammed.
Filters are blocked.
The programme is still running.
Wait for the programme to end.
Perform "Reset" function.
The door opens and closes
incorrectly on appliances which
are designed to be built-in.
The attached door panel is not the
correct weight. Observe the weight
indicated in the enclosed
installation instructions.
Incorrectly set door spring
tension.Set the tension according
to step (point)
26
installation instructions.
5
in the enclosed