- ページ 22

洗濯機 Siemens WM SERIESのPDF 取扱説明書および取付説明書をオンラインで閲覧またはダウンロードできます。Siemens WM SERIES 32 ページ。
Siemens WM SERIES にも：取扱説明書および取付説明書 (36 ページ)

ページを印刷する

Faults and what to do about them.

Information on the display panel

Display

YES

E:16

E:17

E:29

A: 10

E:18

E:23

²»

Other displays

Faults and what to do about them.

Faults

Water is leaking from the

appliance.

The appliance is not filling

with water.

Detergent is not being dis-

pensed.

The door cannot be

opened.

The programme does not

start.

Cause/remedial action

The washing machine door is unlocked. It is possible to add laundry.

Due to the high temperature in the drum, the washing machine door cannot

■

be opened. Wait until the temperature drops.

Due to the high level of water in the drum, the washing machine door can-

■

not be opened. Drain the water (e.g. select the Spin or Empty programme (if

only a drain cycle is required, set rpm (spin speed) to $ Rinse hold = 2

without final spin selected ).

Laundry may become trapped. Close the washing machine door properly.

Turn on the cold water tap fully

■

Supply hose kinked or trapped

■

Water pressure too low. Clean the filter in ?

■

Turn on the hot water tap fully, supply hose kinked or trapped.

■

Supply hose kinked/trapped; water pressure too low. Clean the filter.

■

Hot water hose not connected; washing machine is operated using cold

■

water only. Ignore the message; this message is only displayed for the first

wash cycle.

Detergent solution pump blocked. Clean the detergent solution pump.

■

Drain hose/waste pipe blocked. Clean the drain hose on the siphon.

■

Water in the base trough due to appliance leaking. Call after-sales service.

If childproof lock is active, deactivate it.

Switch off the appliance, wait for five seconds and switch it back on again. If the

display appears again, call after-sales service.

Cause/remedy

Attach the drain hose correctly or replace it.

■

Tighten the threaded joint on the inlet hose.

■

Start button not selected?

■

Is the tap turned on?

■

Could the filter be clogged? Clean the filter ~ Page 21.

■

Is the inlet hose kinked or trapped?

■

The safety function is activated. Stop the programme?

■

$ Rinse stop = 2 without final rinse selected? ~ Page 11.

■

Can the door only be opened by the emergency release? ~ Page 21.

■

Start button for a pause or "Ready in" time pressed?

■

Is the door closed?

■

Childproof lock active? Deactivate.

■