- ページ 26
洗濯機 Siemens WM12W520ILのPDF 取扱説明書および取付説明書をオンラインで閲覧またはダウンロードできます。Siemens WM12W520IL 48 ページ。
ページを印刷する
Appliance settings
en
Programme end
- 0 - and Ï appear in the display panel.
The Ü button indicator lamp is off.
Removing laundry/switching
off the appliance
Open the door and remove the
1.
laundry.
Press the # button. The appliance is
2.
switched off.
Turn off the tap.
3.
Not required for Aqua-Stop
Note:
models.
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Wipe the rubber seal dry.
■
Leave the door and detergent
■
drawer open so that any residual
water can evaporate. ~ Page 28
Always wait until the programme
■
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
If the display panel goes off at the
■
end of a programme, the energy-
saving mode is active. Press any
button to activate the panel.
26
Q
Appliance settings
Y ou can change the following settings:
A p p l i a n c e s e t t i n g s
The volume of the buttons and the
■
information signals (e.g. at the end
of the programme)
Select/deselect the appliance's
■
automatic switch-off function
~ Page 7
Switch the drum-care information
■
signal on/off (depending on the
model).
You will need to activate the setting
mode in order to change these settings.
Activating the setting mode
Press the # button.
1.
The appliance is switched on and
the Cottons programme is shown at
position 1.
Press the Temperature button and,
2.
at the same time, turn the
programme selector clockwise to
position 2. Release the button.
The setting mode is activated and the
preset volume for the information
signals appears in the display panel.
You can now change the settings: