- ページ 2
プロジェクター Epson ActionTower 3000 ComputerのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Epson ActionTower 3000 Computer 4 ページ。 Product information guide
Epson ActionTower 3000 Computer にも： ユーザーマニュアル (34 ページ), ユーザーマニュアル (38 ページ), カートリッジ交換 (2 ページ), 最初に読むマニュアル (29 ページ), 製品情報マニュアル (11 ページ)
ページを印刷する
Home theater system
Video source
Surround sound
Powered speakers
External speakers
Video source
Note: See your home theater receiver documentation for more information
on connections.
Turn on your equipment
1
Turn on your video source.
2
Plug in the projector.
3
Remove the lens cap.
4
Press the
power button on the projector or the On button on the
remote control. The power light flashes blue, then stays on.
Note: To shut down the projector, press the
projector or the Standby button on the remote control twice. You don't
have to wait for the projector to cool down.
5
The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Settings and press Enter. Select Language and press Enter. Select
your language and press Enter. Press the Menu button to exit the menu
system.
Adjust the image
1
If you don't see an image, press one of the Source buttons on the remote
control or the
button on the projector to select the image source.
Note: If you still see a blank screen or have other display problems,
see "Troubleshooting."
Video cable
Receiver
Projector
Video cable
Projector
power button on the
2
For the best image quality, place the projector directly in front of the
center of the screen, facing the screen squarely. If this is not possible,
turn the horizontal and vertical lens shift dials to adjust the image
position and center it on the screen.
3
If the image is tilted, adjust the front feet as shown below.
4
Turn the zoom ring to reduce or enlarge the image.
5
Turn the focus ring to sharpen the image.
6
If your image is uneven on the sides, you can use the keystone correction
feature to adjust the image. To use this feature, you must first set the
lens to the center-top position using the lens shift dials.
Press the
or
buttons to display the keystone correction screen.
Then press the
,
,
, or
vertical keystone distortion.
buttons to correct for horizontal and