- ページ 9

IP電話 Cisco 7926GのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 7926G 10 ページ。 Wavelink avalanche management console
Cisco 7926G にも：リリースノート (16 ページ), 付属品マニュアル (20 ページ), 管理マニュアル (19 ページ), ユーザーマニュアル (16 ページ), 管理マニュアル (23 ページ), インストレーション・マニュアル (12 ページ), 設置マニュアル (21 ページ), 管理マニュアル (14 ページ)

The Battery LED lights green if the battery is charged, or red if the battery is charging.

Step 2

If the Battery LED does not light up as red or green, check that the battery was installed correctly (label side

up). You may need to remove the battery, reorient it, and reinsert it firmly against the contacts.

Cisco Unified Wireless IP Phone 7925G Desktop Charger Notes

Unplugging the Cisco Unified Wireless IP Phone 7925G Desktop Charger from the electrical outlet has the

following consequences:

• As long as a charged spare battery is in place, the station functions normally. The spare battery provides

• If an uncharged spare battery is in place, the station does not function. The Cisco Unified Wireless IP

power for the speakerphone.

◦ When the Battery LED starts flashing amber-yellow, the charge on the spare battery is low. Active

calls continue and new calls can be placed, as long as there is sufficient power in the spare battery.

When the spare battery power is low, the speakerphone does not operate, but calls can continue.

◦ When the Battery LED flashes amber-yellow and dims, the spare battery charge has dropped too

low. Active calls disconnect and new calls cannot be placed. The Cisco Unified Wireless IP Phone

7925G Desktop Charger should be connected to an electrical outlet or a charged spare battery

installed.

Phone 7925G Desktop Charger must be plugged into an electrical outlet, or a charged spare battery

installed.

Cisco Unified Wireless IP Phone 7925G Desktop Charger Notes

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide