- ページ 4
プロジェクター Epson brightlinkのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Epson brightlink 6 ページ。 Volume adjustments
Epson brightlink にも： クイック・スタート・マニュアル (4 ページ), マニュアル (15 ページ)
ページを印刷する
3
Calibrate
Calibration coordinates the position of the pen with the
location of your cursor. If the pen position and cursor
location don't match, you can try auto calibration, or you
can calibrate manually for even greater accuracy. You
don't need a computer, and you won't need to calibrate
again unless the projector or image is moved, or the
image is resized.
1
To start calibration, press the User button on the
remote control.
2
When you see the Auto Calibration screen, do one
of the following:
•
Press
to try auto calibration, then wait until
calibration is complete.
•
Select No, then press
below to calibrate manually.
3
Press the Menu button on the remote control, select
the Extended menu, and press
4
Select the Easy Interactive Function setting and
press
.
5
Select Manual Calibration, then press
6
When you see this screen, press
7
Touch the circles on the screen to perform manual
calibration.
For more detailed instructions, see the online BrightLink
User's Guide.
and follow the steps
.
.
to select Yes.
Using the Remote
Control
Turn projector
on/off
Access menu
system for
additional
adjustments
Calibrate
Page through
documents
Temporarily
turn off image
and sound
For more information on using the remote control and
cool time-saving buttons:
•
See the online BrightLink User's Guide.
•
Go to the training section and watch a video or two at
epson.com/brightlinkvideos (U.S.) or
epson.ca/brightlinkvideos (Canada).
Select from various
image sources
connected to the
projector
Switch between
computer and Easy
Interactive Pen
Enter
Zoom in and out
Stop video action