- ページ 28

プロジェクター Epson BrightLink 1480FiのPDF ユーザーマニュアル補足をオンラインで閲覧またはダウンロードできます。Epson BrightLink 1480Fi 34 ページ。
Epson BrightLink 1480Fi にも：スタート・ヒア・マニュアル (6 ページ)

ページを印刷する

Solving Multi-Projection Problems

Select the same settings for the other projector that creates one unified

image area.

If you cannot select 600 as the Blend Range setting, you can select a

lower setting. However, the black bands will appear on the side of the

projected image.

Solving Other Multi-Projection Problems

If you cannot project an image using the multi-projection feature, try the

following solutions.

• Change the Screen Type setting to 16:9. If you select other screen type

settings, the image may not be projected correctly.

• If you cannot use the interactive feature while using the multi-projection

feature, check the USB cable connection between projectors.

• Make sure the USB cable is securely connected to the USB-A1 or USB-A2

port of the first projector.

• When you set the USB-B2 setting to Off in the projector's Pen/Touch

menu, connect the USB cable to the USB-B1 port of the other projector.

• When you set the USB-B2 setting to one of the HDMI sources in the

projector's Pen/Touch menu, connect the USB cable to the USB-B2 port

of the other projector. The interactive feature is only available when you

select the input source specified in the USB-B2 setting.

Pen/Touch > PC Interactivity > USB-B2