- ページ 20

スイッチ Siemens SITRANS RD500のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SITRANS RD500 48 ページ。 Configuring sitrans rd500 for connection to multiranger with modbus rtu
Siemens SITRANS RD500 にも：取扱説明書 (8 ページ), 取扱説明書 (8 ページ), 取扱説明書 (8 ページ), アプリケーション・マニュアル (6 ページ), マニュアル (11 ページ), 応用例 (9 ページ)

ページを印刷する

•

Time Zone provides offset from GMT (Greenwich Mean Time) and DST is used to

indicate whether or not the panel time has been adjusted for Daylight Savings Time.

The email client uses this adjustment to ensure timestamps are correctly applied to

email headers.

•

SNTP Client allows the user to enable the SNTP Client, a Linked DST, and also enter

Server address, as well as the frequency accessed. SNTP is a simplified version of

NTP used to ensure accurate synchronization of the RD500 clock time.

Network configuration

The RD500's network properties define how the system will connect to your Ethernet

network as well defining modem settings. From the Overview page, click Configure and

then Network to configure the Network settings.

When both GPRS and Ethernet are activated, GPRS is the default gateway.

Note:

The Ethernet mask determines which packets are routed via the Ethernet interface

and which are routed to the default gateway.

Ethernet

•

The Ethernet Mode field controls the method by which the RD500 obtains its IP

configuration. If DHCP mode is selected, the RD500 will try to obtain an IP address

and associated parameters from a DHCP server on the local network. This option

will only function if the DHCP server is configured to allocate a well-known IP

address to the MAC address associated with the unit, as otherwise, users will not

be sure how to address the RD500.

Under Mode, if Ethernet is disabled, the ethernet access port will no longer be

Page 18

SITRANS RD500 – OPERATING INSTRUCTIONS

7ML19985MA01