- ページ 15

スイッチ Siemens SKB62 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Siemens SKB62 Series 32 ページ。 Auxiliary switch
Siemens SKB62 Series にも：取付方法 (6 ページ), 取付方法 (10 ページ), 取付方法 (7 ページ), 取付方法 (6 ページ), 取付方法 (10 ページ), 取付方法 (4 ページ)

ページを印刷する

1. Connection Diagrams

Engineering

Conduct the electrical connections in accordance with local regulations on electrical

installations as well as the section Connection diagrams [➙ 26].

NOTE

Using a safety limiter

Failure to comply with applicable regulations for cable insulation may result in the

suspension of the safety limiter function.

●

Risk of injury and fire from hot device parts

For media below 0 °C, the stem heater ASZ6.6 keeps the valve stem ice-free. In this case,

the actuator bracket and the valve stem must not be insulated in order to ensure air

circulation.

Touching heated parts without safety measures leads to burns.

●

Observe admissible temperatures, see Use [➙ 2] and Technical data [➙ 19].

If an auxiliary switch is used, its switching point should be indicated on the plant schematic.

Every actuator must be driven by a dedicated controller, see Connection diagrams [➙ 26].

Siemens

Smart Infrastructure

Compliance with all applicable regulations for cable insulation must be ensured by the

plant operator.

WARNING

For safety reasons, the steam heater is operated with AC 24 V / 30 W.

Recommendation: For media above 140 °C, the valve must be insulated.

CM1N4564en

2023-10-17