- ページ 7

食器洗い機 Siemens dishwasherのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens dishwasher 30 ページ。 Dishwasher
Siemens dishwasher にも：取扱説明書 (29 ページ), 取扱説明書 (30 ページ), 取扱説明書 (30 ページ), 取扱説明書 (28 ページ), 取扱説明書 (26 ページ), 取扱説明書 (28 ページ), 取扱説明書 (26 ページ), 取扱説明書 (28 ページ), 取扱説明書 (32 ページ), 取扱説明書 (28 ページ), 取扱説明書 (34 ページ), 取扱説明書 (34 ページ), 取扱説明書 (28 ページ), 取扱説明書 (34 ページ), 取扱説明書 (26 ページ), 取扱説明書 (40 ページ), 取扱説明書 (31 ページ), 取扱説明書 (40 ページ), 取扱説明書 (24 ページ), 取扱説明書 (28 ページ), 取扱説明書 (28 ページ)

Special salt $

Always refill with special salt immediately

before switching on the appliance. This

ensures that overrun special salt solution

is immediately washed out and does not

corrode the rinsing tank.

– Open the screw-type cap of the

compartment 1R.

– Fill the tank with water (only required

when switching on the appliance for

the first time).

– Then add dishwasher salt (not table

salt or tablets).

The water is displaced and runs out.

As soon as the salt refill indicator H on

the fascia is lit, top up the salt.

* depending on model

Using detergents with salt

De t e r g e n t s w i t h sa l t c o m p o n e n t

component

If combined detergents with a salt

component are used, salt can usually be

omitted up to a water hardness of 21° dH

(37° fH, 26° Clarke, 3.7 mmol/l). If the

water hardness is over 21° dH, special

salt must be used.

S witching off salt refill indicator/

Sw i t c h i n g o f f w a t e r s o f t e n i n g s y s t e m

water softening system

If the salt refill indicator H is impaired

(e.g. when using combined detergents

containing salt component), it can be

switched off.

– Proceed as described under "Adjusting

ã=

Never fill the salt dispenser with detergent.

You will destroy the water softening

system.

the water softening system" and set the

value to :

The water softening system and salt

refill indicator are now switched off.

Warning