- ページ 6

食器洗い機 Siemens DishwashersのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens Dishwashers 28 ページ。 Dishwasher
Siemens Dishwashers にも：取扱説明書 (30 ページ), 取扱説明書 (30 ページ)

ページを印刷する

Water softening system

To ensure good washing results, the

dishwasher requires soft water, i.e.

containing low amounts of lime, otherwise

white limescale will be deposited on the

utensils and inner container.

Tap water above a specific degree of

water hardness must be softened, i.e.

descaled, for use in a dishwasher. Water is

softened with special salt in the water

softening system of the dishwasher.

The setting and therefore the required

amount of salt depends on the degree of

hardness of your tap water (see table).

Setting

The amount of salt dispensed can be set

in 4 stages depending on the hardness of

your water. Accordingly 0, 1, 2 or 3

displays are lit (see table). Factory setting:

Water hardness table

&ODUNH

+DUGQHVV

UDQJH

VRIW

PHGLXP

KDUG

PPROO

6HWWLQJ

– Find out about the hardness value of

your tap water. Your water utility

company will help you with this.

– Setting can be found in the water

hardness table.

– Open the door.

– Switch on ON/OFF switch (.

– Hold down button > P and press

START button h until the End display

` and salt refill indicator )* flash.

– Release buttons.

The salt refill indicator )* flashes and

the display # is lit (= Setting 1).

To change the setting,

– Press the button < H until the

required setting has been selected.

– Press START button h.

The displays ` and )* go out. The

selected setting is saved.

– Close the door.