- ページ 11

IP電話 Cisco 7941G-GE - IP Phone VoIPのPDF 管理マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 7941G-GE - IP Phone VoIP 12 ページ。 Unified communications manager 9.0 (sccp and sip)
Cisco 7941G-GE - IP Phone VoIP にも：ユーザーマニュアル (4 ページ), ユーザーマニュアル (13 ページ), ユーザーマニュアル (13 ページ), ユーザーマニュアル (13 ページ), ユーザーマニュアル (6 ページ), 管理マニュアル (16 ページ), トラブルシューティングとメンテナンス (27 ページ)

Cisco Unified IP Phones and Your Network

Cisco Unified IP Phones and Different Protocols

The Cisco Unified IP Phones can operate with Skinny Client Control Protocol (SCCP) or Session Initiation

Protocol (SIP). You can convert a phone from using one protocol to using the other protocol.

Convert New Phone from SCCP to SIP

A new, unused phone is set for SCCP by default. To convert this phone to SIP, perform these steps:

Procedure

Step 1

Take one of these actions:

• To autoregister the phone, set the Auto Registration Phone Protocol enterprise parameter in Cisco Unified

• To provision the phone by using the Bulk Administration Tool (BAT), choose the appropriate phone

• To provision the phone manually, make the appropriate changes for SIP on the Phone Configuration

For more information on Cisco Unified Communications Manager configuration, see Cisco Unified

Communications Manager Administration Guide. For more information on using BAT, see Cisco Unified

Communications Manager Bulk Administration Guide.

Step 2

If you are not using DHCP in your network, configure the network parameters for the phone.

Step 3

Save the configuration updates, click Apply Config, click OK in the Apply Configuration Information window,

and have the user power cycle the phone.