- ページ 10

食器洗い機 Siemens SN SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SN Series 40 ページ。 Dishwasher
Siemens SN Series にも：操作上の注意 (38 ページ), 取扱説明書 (38 ページ), 取扱説明書 (42 ページ), 取扱説明書 (42 ページ), 取扱説明書 (44 ページ), 取扱説明書 (46 ページ), 取扱説明書 (44 ページ), 取扱説明書 (42 ページ), 取扱説明書 (48 ページ), 取扱説明書 (42 ページ), 取扱説明書 (44 ページ), 取扱説明書 (40 ページ)

Water softening system/Special salt

Setting

The amount of salt dispensed can be

set in 4 stages

depending on the hardness of your

water. Accordingly 0, 1, 2 or 3 displays

are lit (see table). Factory setting: 1.

1. Find out about the hardness

value of your tap water. Your water

utility company will help you with this.

2. Setting can be found in the water

hardness table.

3. Open the door.

4. Switch on ON/OFF switch (.

5. Hold down button > P and press

START button h until the dry

display ` and salt refill

indicator )* flash.

6. Release buttons.

The salt refill indicator )* flashes

and the display # is lit

(= Setting 1).

To change the setting:

1. Press the button < H until

the required setting has been

selected.

2. Press START button h.

The displays ` and )* go out.

The selected setting is saved.

3. Close the door.