- ページ 24

食器洗い機 Siemens SX SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SX Series 42 ページ。 Dishwasher
Siemens SX Series にも：操作上の注意 (38 ページ), 取扱説明書 (38 ページ), 取扱説明書 (42 ページ), 取扱説明書 (44 ページ), 取扱説明書 (46 ページ), 取扱説明書 (44 ページ), 取扱説明書 (42 ページ), 取扱説明書 (48 ページ), 取扱説明書 (40 ページ), 取扱説明書 (42 ページ), 取扱説明書 (44 ページ), 取扱説明書 (40 ページ)

ページを印刷する

Cleaning and maintenance

T erminating the programme

T e r m i n a t i n g t h e pr o g r a m me

(Reset)

1. Press START button h for

approx. 3 sec.

The numerical display )*

indicates :

2. The programme sequence lasts

approx. 1 min. On the digital

display )* is indicated :

3. Switch off ON/OFF switch (.

Changing the programme

When the START button h has been

pressed, the programme cannot be

changed.

The only way a programme can be

changed is by Cancel programme

(Reset).

Intensive drying

The final rinse uses a higher

temperature which improves the drying

result. The running time may increase

slightly. (Caution if utensils are delicate!)

1. Close the door.

2. Switch on ON/OFF switch (.

3. Hold down programme button #

and press START button h until

the digital display )* : ... is

indicated.

4. Release both buttons.

The LED for button # flashes and

the digital display )* displays the

the digital display

factory setting :

factory setting

5. Press programme button # until

Press programme button

the factory set value

the factory set value :

the factory set value

indicated on the digital display )*.

indicated on the digital display

To change the setting,

1. Press the button 3 to switch the

Press the button

Intensive drying on

Intensive drying on :

2. Press START button h.

Press START button

The set value is saved.

Cleaning and

maintenance

e n a n c e

a n d m a i n t

C l e a n i n g

A regular inspection and maintenance

of your machine will help to prevent

faults. This saves time and prevents

problems.

Overall condition

of the machine

Check spray arm for grease

and limescale deposits.

If you find such deposits:

or off :