- ページ 25
食器洗い機 Siemens SX76M091GB/35のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SX76M091GB/35 44 ページ。
End of programme
value ‹:‹‹ is indicated on the numerical
The programme has ended when the
display h.
The end of the programme is also
indicated by an acoustic signal. This
function can be changed as follows:
1. Open the door.
2. Switch on ON/OFF switch (.
3. Hold down programme button #
and press START button ` until
•:‹.... is indicated on the digital
display.
4. Release both buttons.
The LED for button # flashes and
the digital display h displays the
factory setting •:‹....
5. Press programme button # until
the factory set value ›:‹ƒ is
indicated on the digital display h.
To change the setting,
1. Press programme button 3. Each
time the button is pressed, the set
the value of ›:‹„ has been reached,
value increases by one level; when
the display jumps back to ›:‹‹ (off).
2. Press START button `, the set
value is saved.
3. Close the door.
Operating the appliance
Automatic switch off after end
of programme or interior light*
* depending on model
To save energy, the dishwasher can be
automatically switched off 1 min or 120
min after the programme ends.
The setting can be selected from ˜:‹‹
to ˜:‹ƒ.
˜:‹‹ Appliance does not
switch off automatically.
The interior light 1"
comes on when the door
is opened irrespective of whether
the ON/OFF switch (
is switched on or off. When
the door is closed the light is off. If
the door is open for longer than 60
min., the light switches off
automatically. The interior light 1"
is lit only when the set value ˜:‹‹
is selected.
˜:‹‚ Appliance switches off after 1 min.
˜:‹ƒ Appliance switches off after 120
min.
Note
Note that with the settings ˜:‹‚ and
˜:‹ƒ, the interior light 1" is switched
off. To activate the interior lighting, press
the ON/OFF switch (.If the door is
open for longer than 60 minutes, the
light will switch off automatically.
1. Open the door.
2. Switch on ON/OFF switch (.
en
A u t o m a t i c s w i t c h o f f / i n t e r i o r l i g h t
25