- ページ 17
ホブ Siemens ED BS SeriesのPDF ご利用案内をオンラインで閲覧またはダウンロードできます。Siemens ED BS Series 24 ページ。 Induction hob with integrated ventilation system
ページを印刷するUse special grease solvent for stubborn dirt. You
can purchase the grease solvent from the after-
sales service, through our online shop or in a spe-
cialist shop.
4.
Rinse the grease filters thoroughly.
5.
Allow the grease filters to drain.
Cleaning the grease filter in the dishwasher
1.
For optimum cleaning results, disassemble the
grease filter.
2.
Place the individual components of the grease filter
loosely in the dishwasher and do not jam them in.
Do not clean heavily soiled grease filters with table-
ware.
Do not use aggressive, acidic or alkaline cleaning
products.
18 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
→ "Customer Service", Page 19
3.
Start the dishwasher.
Select a maximum temperature setting of 70 °C.
4.
Leave the grease filter to drain.
17.7 Cleaning the overflow container
The overflow container collects liquids or objects that
come into the appliance from above.
Requirement: The appliance has cooled and the resid-
ual heat indicator has gone out.
1.
Hold the overflow container with one hand and un-
screw it with the other hand.
Hold the overflow container level to prevent liquid
‒
from leaking out.
2.
Empty the overflow container and rinse it out.
3.
If required, unscrew the screw and clean the over-
flow container without the screw in the dishwasher.
4.
Clean the overflow container before screwing it
back into place.
5.
Ensure that the supply to the overflow container is
not blocked.
Remove any objects that have entered the appli-
ance once it has cooled down. To do this, remove
the grease filter. → Page 16
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord or the appliance power cable of
▶
this appliance is damaged, it must be replaced with
a special power cord or special appliance power
cable, which is available from the manufacturer or
its Customer Service.
Troubleshooting en
17