- ページ 15

ホブ Siemens ED611BS16EのPDF ご利用案内をオンラインで閲覧またはダウンロードできます。Siemens ED611BS16E 24 ページ。 Induction hob with integrated ventilation system

17.2 Components to be cleaned or replaced
The following overview shows the components of the
appliance that you either replace or clean.
Grease filter
1
Odour filter or acoustics filter
2
Glass ceramic
3
Overflow container
4
17.3 Cleaning the hob
Clean the hob after every use to stop cooking residues
from getting burnt on.
Requirement: The hob must be cold. Do not allow the
hob to cool down if it has sugar stains, rice starch,
plastic or aluminium foil on it.
1.
Remove heavy soiling using a glass scraper.
2.
Clean the hob with a cleaning agent for glass
ceramic.
Follow the cleaning instructions on the packaging of
the cleaning agent.
Tips
¡ You can achieve good cleaning results using a
special sponge for glass ceramic.
¡ If you keep the base of the cookware clean, the
hob surface remains in a good condition.
17.4 Cleaning the hob surround
If the hob frame is dirty or stained after use, clean this.
Note: Do not use a glass scraper.
1.
Clean the hob frame with hot soapy water and a soft
cloth.
Wash new sponge cloths thoroughly before use.
2.
Dry with a soft cloth.
17.5 Changing the odour filter or acoustics
filter
Change the odour filter regularly. Change the acoustics
filters if they are dirty.
Note: You can obtain odour filters or acoustics filters
from specialist retailers, customer service or in the on-
line shop.
1
1.
To keep them in good working order, only use
2
genuine replacement filters.
2.
ATTENTION!
3
Falling grease filters may damage the hob below.
Grip below the grease filter with one hand.
Remove the grease filter.
Grease may accumulate in the bottom of the
container. Hold the grease filter level to prevent
4
grease from dripping out.
3.
Remove the four odour filters or acoustics filters,
and dispose of them properly.
4.
Insert two odour filters or acoustics filters into the
left and right of the appliance and slide them for-
wards.
Cleaning and servicing en
15