- ページ 9

ホブ Siemens EF6 SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens EF6 Series 16 ページ。
Siemens EF6 Series にも：取扱説明書 (12 ページ), 取扱説明書 (16 ページ), 取扱説明書 (8 ページ), 取扱説明書 (12 ページ), ユーザーマニュアル (12 ページ)

ページを印刷する

Changing the basic settings

The hob must be switched off.

Switch on the front left hotplate

setting 1.

Within the next 10 seconds touch the

4 seconds.

and

flash alternately in the lower display and

™

‚

lights up in the upper display.

Touch the

symbol repeatedly until the desired

‚

display appears in the lower display.

Touch the

symbol repeatedly until the desired

display appears in the upper display.

Touch the

symbol for 4 seconds.

‚

The setting is activated.

Switch off the hotplate.

and set to heat

symbol for

‚

‹

DCleaning

S uitable maintenance and cleaning products can be

C l e a n i n g

purchased from the after-sales service or in our e-Shop.

Ceramic

Clean the hob after each use. This will prevent spills

from burning onto the ceramic.

Only clean the hob when it has cooled down sufficiently.

Use only cleaning agents which are suitable for glass

ceramic. Follow the cleaning instructions on the

packaging.

Never use:

Undiluted washing-up liquid

■

Detergent intended for dishwashers

■

Scouring agents

■

Harsh cleaning agents such as oven spray or stain

■

remover

Abrasive sponges

■

High-pressure cleaners or steam jet cleaners

■

Ground-in dirt can be best removed with a glass

scraper, available from retailers. Please note the

manufacturer's instructions.

You can also obtain a suitable glass scraper from our

after-sales service or from the e-Shop.

Using special sponges to clean glass ceramic achieves

great cleaning results.

Hob surround

To prevent damage to the hob surround, observe the

following instructions:

Use only hot soapy water.

■

Wash new sponge cloths thoroughly before use.

■

Do not use any sharp or abrasive agents.

■

Do not use the glass scraper.

■