- ページ 7

ホブ Siemens EH...MN SERIESのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens EH...MN SERIES 20 ページ。
Siemens EH...MN SERIES にも：取扱説明書 (20 ページ)

ページを印刷する

The hotplates

Hotplate

Single hotplate

Flexible hotplate

Only use pans suitable for induction cooking, see the "Appropriate cookware" section.

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show

those which are still hot. Avoid touching them when this

indicator is lit.

Programming the hob

This section will show you how to program the hotplates. The

table contains power levels and cooking times for several

dishes.

Switching the hob on and off

The hob is turned on and off with the main switch.

To switch on: press the

main switch lights up. The hob is ready for use.

To switch off: press the

main switch disappears. All hotplates are off. The residual heat

indicator stays on until the hotplates have cooled down

completely.

Note: The hob switches off automatically when all the hotplates

are switched off for more than 20 seconds.

Setting the hotplate

The desired power level is set in the programming panel.

Power level 1 = minimum power.

Power level 9 = maximum power.

Each power level has an intermediate setting. This is marked

with a dot.

Select the hotplate and the power level

The hob must be switched on.

Select the hotplate with the

light up on the display.

Melting

Chocolate, chocolate coating

Butter, honey, gelatin

* Uncovered cooking

** Uncovered

*** Turn frequently

Activating and deactivating

Use a correctly sized pan.

See "flexible hotplate" section

symbol. The indicator above the

symbol until the indicator above the

symbol. The

‹

and

Although the hob is switched off, the indicator

remain on for as long as the hotplate is hot.

If the pan is removed before the hotplate is turned off, the

indicator

alternately.

Within the next 10 seconds, slide a finger on the

programming zone until the desired power level lights up.

The power level has been set.

Changing the power level

Select the hotplate and set the desired power level in the

programming zone.

Switch off the hotplate

Select the hotplate and set it to

The hotplate turns off and the residual heat indicator appears.

Notes

Upon selecting a hotplate the

■

then proceed to be adjusted.

symbols

If no pan has been placed on the induction hotplate, the

■

selected power level flashes. After a certain time has

elapsed, the hotplate switches off.

Cooking guidelines table

The table below contains some examples.

Cooking times depend on the power level, type, weight and

quality of the food. As such they are approximate.

When heating purées, creams and thick sauces, stir

occasionally.

Use power level 9 to begin cooking.

and the selected power level will appear

•

‹

in the programming panel.

symbol is displayed. It may

Power level

Cooking time

1-1.

1-2

will

•