- ページ 8

ホブ Siemens EH6 QA1 SeriesのPDF 取付・使用説明書をオンラインで閲覧またはダウンロードできます。Siemens EH6 QA1 Series 16 ページ。

ページを印刷する

Empty pans or those with a thin base

Do not heat empty pans, nor use pans with a thin base. The

hob is equipped with an internal safety system. However, an

empty pan may heat up so quickly that the "automatic switch

off" function may not have time to react and the pan may reach

very high temperatures. The base of the pan could melt and

damage the glass on the hob. In this case, do not touch the

Familiarise yourself with the appliance

An overview of models is provided on page 2.

The control panel

Control panels

Function

Main switch

Select the hotplate

Select power level

Childproof lock/Basic settings

Programming the hob

Turning the hob on and off

To turn on: Press the

symbol. The indicator next to the main

switch lights up.

To turn off: press the

symbol until the indicator next to the

main switch goes out. The residual heat indicator stays lit until

the hotplates have cooled sufficiently.

Note: The hob switches off automatically when all the hotplates

are switched off for more than 20 seconds.

Setting the hotplate

The hob must be switched on.

Press the

symbol several times until the

required hotplate lights up.

pan and switch the hotplate off. If it fails to work after it has

cooled down, please contact the Technical Assistance Service.

Pan detection

Each hotplate has a minimum limit for detecting pans, which

varies depending on the material of the pan being used. You

should therefore use the hotplate that is most suitable for the

diameter of your pan.

The hotplates

Hotplate

Residual heat indicator

The hob has a residual heat indicator

which lights up when they are hot. Avoid touching them when

this indicator is lit.

The

the hob has been turned off.

If the pan is removed before the hotplate is switched off, the

will appear and alternate with the selected power level.

•

Within the next 5 seconds, press the + or - symbol. The basic

setting appears.

+ symbol = power level 1.

- symbol = power level 9.

indicator of the

‹

To change the power level: select the hotplate and press the

+ or - symbol until the required power level appears.

Activating and deactivating

Single hotplate

Use a correctly sized pan.

Grill plate

The hotplate turns on automatically

when a pan the same size as its outer

edges is placed on it.

light will remain on while the hotplate is hot, even after

•

on each hotplate,

•