- ページ 12

ホブ Siemens EH7 MD2 SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens EH7 MD2 Series 20 ページ。
Siemens EH7 MD2 Series にも：取扱説明書 (16 ページ)

ページを印刷する

Powerboost function

The Powerboost function can be used to heat large amounts of

water more quickly than the power level

Limitation on use

This function is available on all hotplates, provided that no other

hotplate in the same group is operating, (see picture). If this is

not the case, the

and

›

hotplate display; then it will automatically set the power level

In group 2, the powerboost function may be activated at the

same time for all hotplates (see picture).

*URXS

Time programming function

This function may be used in two different ways:

to automatically switch off a hotplate.

■

as a timer.

■

Turning off a hotplate automatically

Enter the cooking time for the required hotplate. The hotplate

turns off automatically once the time has elapsed.

How to program

Select the required power level.

Press the

symbol. The

up.

is displayed in the time program function display. To

‹‹

select another hotplate, press the

until the

indicator for the desired hotplate lights up.

Select the required cooking time in the programming panel.

The possible previous setting is, from left to right 1, 2, 3, etc.,

up to 10 minutes. Within the next 10 seconds, continue

passing through the options in the programming panel until

reaching the desired time.

After a few seconds, the cooking time begins to count down.

Automatic programming

If the previous setting from 1 to 5 is pressed in the

programming panel, the cooking time is reduced by one

minute, if it is held down the time is automatically reduced to

one minute.

symbols will flash on the selected

*URXS

indicator of the hotplate lights

symbol several times

To activate

Select the power level

Press the programming panel located above the

The function has been activated.

To turn off

Press the programming panel located above the

The Powerboost function has been deactivated.

Note: In certain circumstances, the Powerboost function may

turn off automatically in order to protect the electronic

components inside the hob.

If the previous setting from 6 to 10 is pressed in the

programming panel , the cooking time is increased by one

minute, if it is held down the time is automatically increased to

99 minutes.

Once the time has elapsed

The hotplate switches off. An audible signal sounds and

appears in the time program function display for 10 seconds.

The

indicator lights up. Pressing the

indicators and stops the signal.

Changing or cancelling the time

Press the

symbol several times until the desired

lights up. Change the cooking time in the programming panel,

or set to

‹‹

Automatically switch off a hotplate with the deep-frying

function

When cooking using the deep-frying function, the programmed

cooking time begins to count down once the selected hotplate

reaches the desired temperature.

Notes

If a cooking time has been programmed in several zones, it

■

can be set to display all time values. To do this, press the

symbol several times until the

hotplate lights up.

Cooking times of up to 99 minutes can be programmed.

■

Automatic timer

With this function you may select a cooking time for all

hotplates. Once a hotplate is switched on, the selected time will

begin to count down. The hotplate will automatically switch off

when the cooking time has elapsed.

Instructions on activating the timer are found in the chapter

entitled "Basic settings".

Note: The cooking time of a zone may be cancelled or

changed:

Press the

symbol several times until the required

indicator lights up. Change the cooking time in the

programming panel, or set to

@›

symbol turns off the

indicator for the required

‹‹

symbol.

@›

symbol.

‹‹

indicator