- ページ 8

ホブ Siemens EH8 FE SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens EH8 FE Series 28 ページ。
Siemens EH8 FE Series にも：ご利用案内 (20 ページ)

ページを印刷する

Induction cooking

The ferromagnetic area will also be reduced if the

■

material from which the base of the cookware is

made contains aluminium, for example. This may

mean that the cookware will not become sufficiently

hot or even that it will not be detected.

Unsuitable pans

Never use diffuser hobs or pans made from:

common thin steel

■

glass

■

earthenware

■

copper

■

aluminium

■

Properties of the base of the cookware

The material(s) from which the base of the cookware is

made can affect the cooking result. Using pots and

pans made from materials that distribute heat evenly

through them, such as stainless-steel pans with a three-

layer base, saves time and energy.

Use cookware with a flat base; if the base of the

cookware is uneven, this may impair the heat supply.

Absence of pan or unsuitable size

If no pan is placed on the selected hotplate, or if it is

made of unsuitable material or is not the correct size,

the power level displayed on the hotplate indicator will

flash. Place a suitable pan on the hotplate to stop the

flashing. If this takes more than 90 seconds, the

hotplate will switch off automatically.

Empty pans or those with a thin base

Do not heat empty pans, nor use pans with a thin base.

The hob is equipped with an internal safety system.

However, an empty pan may heat up so quickly that the

"automatic switch off" function may not have time to

react and the pan may reach very high temperatures.

The base of the pan could melt and damage the glass

on the hob. In this case, do not touch the pan and

switch the hotplate off. If it fails to work after it has

cooled down, please contact the Technical Assistance

Service.

Pan detection

Each hotplate has a lower limit for pan detection. This

depends on the diameter of the ferromagnetic area of

the cookware and the material from which its base is

made. For this reason, you should always use the

hotplate that best matches the diameter of the base of

the pan.