- ページ 13

ホブ Siemens EH8..FM SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens EH8..FM Series 21 ページ。
Siemens EH8..FM Series にも：取扱説明書 (16 ページ)

ページを印刷する

Automatic programming

If the previous setting from 1 to 5 is pressed in the

programming zone, the cooking time is reduced by one minute.

If the previous setting from 6 to 10 is pressed in the

programming zone, the cooking time is increased by one

minute.

Changing or cancelling the time

Select the hotplate and then press the

Change the cooking time using the programming zone or set

‹‹

in order to cancel the time.

Automatically switch off a hotplate with the deep-frying

function

When cooking using the deep-frying function, the programmed

cooking time begins to count down once the selected zone

reaches the desired temperature.

Once the time has elapsed

The hotplate switches off. A warning signal sounds. The time

program function lights up

When the

symbol is pressed, the indications turn off and the

beeping stops.

Cleaning lock function

Cleaning the control panel while the hob is switched on may

change the settings.

In order to avoid this, the hob has a cleaning lock function.

Press the

symbol. A signal sounds. The control panel is

‚

Automatic time limitation

If the hotplate remains in use for a long time and no changes

are made in the settings, the automatic time limitation function

is triggered.

The hotplate stops heating. The

heat indicator

flash alternately in the display.

•

Displaying energy consumption

This function displays total energy consumption for the time the

hob has been switched on.

After switching off the hob, the consumption in kWh is

displayed for 10 seconds.

An example is shown in the image with a consumption

kWh.

‚

‹‰

symbol.

for 10 seconds in the display.

‹‹

‰

symbol and the residual

NZK

Notes

If cooking times have been programmed for various

■

hotplates, the time programming function always displays the

time for the selected hotplate.

Any cooking time can be programmed for up to 99 minutes.

■

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

Programming

Press the

symbol several times until the

up.

‹‹

lights up in the time program function display.

Select the desired time in the programming panel.

The timer starts to count down after a few seconds.

Changing or cancelling the time

Press the

symbol several times until the

up. Change the time with the programming zone, or set to

Once the time has elapsed

A warning signal sounds. In the time program function

display

is shown, and the

‹‹

10 seconds the indicators turn off.

When the

symbol is pressed, the indicators turn off and the

beeping stops.

locked for 35 seconds. The control panel surface can now be

cleaned without the risk of changing the settings.

Note: The lock does not affect the main switch. The hob may

be turned off when desired.

The indicator goes out when any symbol is pressed. The

hotplate can now be reset.

When the automatic time function is used, it is governed by the

selected power level (from 1 to 10 hours).

The Basic Settings chapter provides information on activating

this function.

indicator lights

indicator lights up. After

‹‹