- ページ 22

プロジェクター Epson CPD-17904のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Epson CPD-17904 48 ページ。 Epson powerlite home 10 projector cpd-17904

ページを印刷する

6. Select the

Message

Turn this option off if you don't want to display the

of the input source or color mode. Warning messages are still displayed.

Background Color

Selects the screen color to display (blue or black) when you press the

A/V Mute

Startup Screen

Turn on this option to display the Epson logo whenever the projector starts.

7. Select the

Video Signal

Leave this set at

documentation for your video equipment specifies a setting.

Input A

Specifies the format for the video source connected to the Input A ports. Select either

Component

8. Select the

speakers connected to the projector's

9. Select the

menus.

Repositioning the Picture

Follow these steps to move the picture to a different position on the screen:

1. Press the

2. Press the down arrow button on the remote control or the

highlight the Setting menu. Then press

3. Select the

4. Use the arrow buttons on the remote control or the

projector to move the image left, right, up, or down.

5. When the image is positioned the way you want it, press the

On Screen Display

button on the remote control.

option to configure the input signal from your video equipment:

Input Signal

(composite or S-video signals only)

unless your input source is N-PAL format or the

Auto

(component and RGB video signals only)

RGB Video

option to adjust the volume of the projector's audio system or

Volume

option to choose the language you want to use for the projector

Language

button to display the menu screen.

option, then select the

Screen

option to make changes to these settings:

ports.

Audio

Select

option. You see a positioning screen.

Position

message or the name

No Signal

button on the projector to

buttons on the

button to exit.