- ページ 33

プロジェクター Epson CPD-17904のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Epson CPD-17904 48 ページ。 Epson powerlite home 10 projector cpd-17904

ページを印刷する

Try reconnecting both ends of your cable.

Make sure your video equipment is on. If it isn't, turn the projector off, then turn it on

again after you've turned on your video equipment.

You see a screen with the message

Make sure your video equipment is turned on.

Make sure your cable(s) are connected correctly, as described in the Quick Setup sheet.

Press the

Source

the remote control to select the correct input source. Allow a few seconds for the

projector to sync up.

Check the settings in the

make sure they're correct for your video equipment. See page 22 for details.

If you're using a PC laptop:

Press the function key that lets you display on an external monitor. It's often labeled with

an icon such as

the

key while pressing it. Check your laptop's manual or online help.

On most systems, the

projector, or display on both at the same time. Allow a few seconds for the projector to

sync up after pressing it.

Depending on your computer's video card, you might need to use the Display utility in

the Control Panel to make sure that both the LCD screen and external monitor port are

enabled. See your computer's documentation for details.

If you're using a Macintosh laptop with OS X:

1. Select

System Preferences

2. Click

Detect Displays

3. To display the entire desktop on both your projector screen and LCD screen, click

the

Arrange

window.)

No Signal

button on the projector or the

Video Signal

, but it may also be labeled

key lets you toggle between the LCD screen and the

from the Apple menu and click

tab. (If you don't see this tab, make sure it isn't hidden by another

displayed.

Input A/B

S-Video/Video

and

options in the Setting menu to

Input A

. You may have to hold down

CRT/LCD

buttons on

Displays