- ページ 9

IP電話 Cisco 7970 SeriesのPDF セッティングをオンラインで閲覧またはダウンロードできます。Cisco 7970 Series 15 ページ。 Unified ip phone
Cisco 7970 Series にも：クイック・リファレンス (2 ページ), 電話マニュアル (45 ページ)

ページを印刷する

Chapter 3

Setting Up the Cisco IP Phone

To install a Cisco IP Phone, perform the following steps:

Procedure

Step 1

Connect the handset to the

Handset port.

Step 2

Connect a headset to the

Headset port.

Step 3

Connect a microphone to the

Microphone jack.

Step 4

Connect an external speaker to

the Speaker jack.

Step 5

Connect the power supply to the

Cisco DC Adapter port.

Step 6

Connect a Category 3 or 5

straight-through Ethernet cable

from the switch to the 10/100

SW port .

Step 7

Connect a Category 3 or 5

straight-through Ethernet cable

from another network device,

such as a desktop computer, to

the 10/100 PC port.

OL-4314-01

Notes

—

Optional. You can add a

headset later if you do not

connect one now.

This option is not available

if you are using in-line

power. You must use an

external power supply.

This option is not available

if you are using in-line

power. You must use an

external power supply.

This step is required if you

are using external speakers

or microphone.

Each Cisco IP Phone ships

with one Ethernet cable in

the box.

Optional. You can connect

another network device later

if you do not connect one

now.

Cisco IP Phone 7970 Administration Guide for Cisco CallManager 3.3

Installing the Cisco IP Phone

Reference

—

See the

"Headset" section on

page 3-4

for supported

headsets.

See the

"External Speakers

and Microphone" section on

page 3-4

for guidelines.

See the

"External Speakers

and Microphone" section on

page 3-4

for guidelines.

See the

"Providing Power to

the Cisco IP Phone 7970"

section on page

2-4.

See the

"Network and

Access Ports" section on

page 3-3

for guidelines.

See the

"Network and

Access Ports" section on

page 3-3

for guidelines.

3-9