- ページ 36

プロジェクター Epson EasyMP Monitor 4.50のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Epson EasyMP Monitor 4.50 47 ページ。 Operation guide - easymp monitor v4.50
Epson EasyMP Monitor 4.50 にも：操作マニュアル (11 ページ)

ページを印刷する

Using the control functions

Shows the current day in a red box.

Days for which timer settings have been made are shown in bold.

Click

to switch to the calendar for the previous or next

month.

Timers

Shows a list of the timer settings.

The line colors in the Timers list have the following meanings:

Current day's timer

setting

When some of the projectors in the group have timer

setting enabled and others have it disabled for the

current day's timer setting

When the current day's timer setting is a disabled setting

Timer setting for a day other than the current day

Delete

Lets you delete timer settings that have been selected

from the timer list.

Closes the Timer Settings window.

Edit

Lets you change the timer settings that have been

selected from the timer list. If a group has been selected

for status checking, the settings cannot be changed.

Add

Registers new timer settings. (See the next section for

more information.)

Enabled/disabled

Switches the timer settings that have been selected from

the timer list between enabled and disabled.

Procedures for new timer settings

Procedure

Click "Add" on the Timer Settings window. The following

window is displayed.

At Operation, you can carry out the operations of turning the pow-

er on and off and switching the input sources, similarly for the con-

trol buttons on the main window. If you set the input source

switching, the projector's power will turn on at the timer start time

even if it is not on at the time. Because of this, it is not necessary to

make two separate timer settings for turning the power on and

switching the input source.

After completing the timer settings, click "OK".

The timer settings that have been made will be registered and they

can be checked in the displayed timer list.