Registering and deleting projectors for monitoring
Procedures for registration
Procedure
A
Select the projector(s) to be registerd from the displayed
list, and then click "Edit".
The following window will be displayed.
Make the necessary settings while referring to the following table.
Enter the name of the projector(s) to be displayed in
Display name
Grouping view or Detail list view.
Up to a maximum of 32 bytes can be entered. A space
cannot be used as the first character.
Select the icon(s) to be displayed in Grouping view or
Display icon
Detail list view.
Parent group
Select when registering a projector in a group.
If no groups have been created, this cannot be selected.
s "Registering several projectors to a monitoring
group all at once"
Projector name
This shows the name that has been registered on the
projector.
This shows the IP address for the registered projector.
IP address
This cannot be selected when registering projectors
Use Serial W
using automatic search.
TCP/IP conver-
sion adaptor.
This cannot be selected when registering projectors
Port Number
using automatic search.
If a Monitor Password has been set for the projector,
Monitor Pass-
be sure to enter the Monitor Password that has been
word
set. If the correct password is not entered at this time,
it will not be possible to monitor and control the
projector even though it is registered.
You can enter some kind of memo about the projector.
Description
The details you enter here will be displayed at the
projector properties.
Up to a maximum of 60 bytes can be entered.
Select this when you want monitoring to start.
Monitor
B
After entering the details, click "Register" to start the
registration. When the message is displayed, click "OK".
To continue registering other projector(s), repeat Steps 1 and 2.
14
p.16
ページを印刷する