Operating environment
Procedure
A
Turn the computer on.
To prevent problems from occurring during the installation, we
recommend that you terminate all resident applications that can
be ended.
B
Load the supplied Projector Software CD-ROM in your
computer.
The installer automatically starts up.
C
From here, continue with the installation by following the
on-screen messages.
The software name has been changed.
q
Before: EMP Monitor _ After: EasyMP Monitor
If you are already using EMP Monitor, you can replace with this
software. To update software, uninstall EMP Monitor first, and
then install this software.
Limitations imposed by a Windows Vista
environment
When using EasyMP Monitor under Windows Vista, note the following
limitations.
• You must have administrator authority in order to use Register at
startup on the Environment setup screen of EasyMP Monitor.
"Monitoring using the system tray"
s
p.24
• Even after EasyMP Monitor has been uninstalled, the settings and log
information will remain on the hard disk. If this information is no
longer required, you may delete the EasyMP Monitor Ver.4.31 folder.
Provided the default settings were used at installation, this folder can
be found at: "C:\Users\(User Name)\AppData\Local\VirtualStore
\Program Files\EPSON Projector\EasyMP Monitor Ver.4.31"
Before starting operations
Check the following points before starting up EasyMP Monitor.
• EasyMP Monitor must be installed on the computer to be used for
monitoring and control.
• The computer and the projectors must be connected to the network.
• If using Windows 2000/Windows NT4.0/Windows XP/Windows Vista,
the computer must be started up in Administrator mode.
• Depending on the projector model, a commercially-available serial
TCP/IP conversion adapter and a connection cable are required in
order to use EasyMP Monitor.
Mode"
Make the settings for the serial
connecting to the projector.
Projector's User's Guide "Standby
s
TCP/IP conversion adapter before
W
8
W
ページを印刷する