Connecting to a Projector on a Network and Projecting
K
Clear list
Deletes all search results.
L
IP address (Advanced Connection Mode only)
The projector's IP address is displayed.
M
Display
Select the number displayed (when Use multi-display is selected). s
N
Profile
You can search for a projector on the network using a Profile saved
using Save in the profile. s
O
SSID (Quick Connection Mode only)
The projector's SSID is displayed.
P
Signal intensity
This is displayed when the connection is made in Quick Connection Mode. As the
Signal intensity increases, so does the number of lit indicators.
Q
Update list (Quick Connection Mode only)
Updates Status and Signal intensity.
p.26
p.30
Using the Toolbar
The toolbar is displayed on the computer screen after EasyMP Network
Projection starts and a connection is made with the projector. You can use
this toolbar to operate and make settings for the projector.
Select target projector
Click to limit the projectors operated from the toolbar when projecting
from multiple projectors using the distribution function or Multi-
screen display. The indication below the icon shows the projectors that
can be controlled.
ALL indicates that all of the connected projectors can be controlled.
For example, when "1, 3" is displayed, projectors No. 1 and No. 3 can be
controlled.
Click
to display the following screen.
A
Select the projector to be controlled.
B
Indicates the No. of an allocated projector. This No. indicates the
No. of the projector that you can control from the toolbar.
C
Indicates the status of the projector.
Stop
15
ページを印刷する