Connecting to a Projector on a Network and Projecting
Standby
Busy
Busy (Disable
interrupt con-
nection)
Currently in
use by another
application
Searching
Not found.
D
Projector name
The projector's name is displayed.
E
Update list (Quick Connection Mode only)
Updates Status and Signal intensity.
F
Disable interrupt connection
Select this to prevent an interrupt connection by other computers while connected
to the selected projector.
G
Use multi-display
Select this when using the Multi-screen display function. When this is selected,
Display layout and Display properties are displayed at the bottom of the screen.
s "Using Multi-Screen Display"
H
Troubleshooting
If there is a problem and you cannot have a connection, press this button to open
the EasyMP Network Projection Troubleshooting screen.
Available.
Available. When you click Connect, the
computer currently connected is
disconnected and your computer is
connected.
Cannot be selected. Disable interrupt
connection is set on another computer
which is already connected.
The projector's Configuration menu is
open. You can select it after closing the
Configuration menu and running the
search again.
Displayed while running Manual search or
Profile.
Displayed when a projector cannot be found
as a result of Manual search or Profile. In
Quick Connection Mode, you can only
select multiple projectors with the same
SSID.
p.23
I
Connect
Connect to the projector you selected from the search results list. When a
connection is made with a projector, a toolbar is displayed.
J
Set options
You can set general setting options such as the processing method when starting
EasyMP Network Projection.
s "Set options"
p.32
K
Save in the profile
Saves the results of a network projector search as a profile.
s "Making a Profile"
p.17
L
Clear list
Deletes all search results.
M
SSID (Quick Connection Mode only)
The projector's SSID is displayed.
N
Signal intensity (Quick Connection Mode only)
As the Signal intensity increases, so does the number of lit indicators.
O
Profile
You can search for a projector on the network using a profile saved using
Save in the profile.
s "Performing a Search with a Profile"
P
IP address (Advanced Connection Mode only)
The projector's IP address is displayed.
Q
Display
Select the display number (when Use multi-display is selected).
s "Projecting the Allocated Images"
p.17
p.29
13
ページを印刷する