- ページ 5
リモコン Digital Lighting Systems OPTIMA-DSのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Digital Lighting Systems OPTIMA-DS 10 ページ。 Optima-ds series dmx chaser/cross-fader controllers
ページを印刷するDigital Lighting Systems
D
- Installation Instructions ( See Figs. 4 & 5 below).
1. Install the OPTIMA in a convenient location. Fig. 4 shows an OPTIMA-DS which has a female XLR connector
mounted on the side of its aluminium enclosure. OPTIMA-DS2 models are mounted in deep single gang masonry
boxes and have a female XLR connector mounted externally (See Fig. 5 below).
2. Provide a standard power outlet with a toggle switch for the wall transformer. Plug the supplied transformer to the
OPTIMA using the Molex connector plugs. The OPTIMA may remain energized at all times. The loads can be turned
off by using the front panel 'Black-Out' button.
3. Install the DMX dimmer pack and follow the wiring instructions in its user manual.
4. Connect the OPTIMA to the Dimmer Pack using the DMX cable (DMX-CC-LEN) to either internally or externally
mounted XLR connector. Skip to Operating Instructions.
OPTIMA-DS
Lighting Animation Controller
MODE
FADE
RUN
AUTO
RATE
MAX.
STOP
LEVEL
BLK.
MIN.
OUT
LEVEL
Digital Lighting Systems
Miami, Fl. USA
digitallighting.com
Fig. 4 OPTIMA-DS Installation Drawing
E
- OPTIMA DMX and Power Connections
The OPTIMA panels use a standard 5-Pin Female XLR connector to
connect to DMX equipment as seen in Figs. 4 & 5. They are also
available on request with an unterminated pigtail that plugs into the
back of the unit so that customer may make their own DMX connections
or with a pre-terminated cable with XLR connector to the customer's
J8FXLR5-L)
desired length (
. An external transformer supplies power via
a 2-pos. Molex type connector.
Power and DMX pin assignments are shown in Fig. 6.
TO DMX
Equipment
5-Pin Female
5
1
XLR Connector
4
2
3
Ground Shield
-D
+D
J8FXLR5-L - L = Length in feet.
7588 NW 8th Street, Miami, Fl. 33126 Tel: 305-264-8391
Copyright 1999 Digital Lighting Systems, All rights Reserved
OPTIMA-DS
9V Wall
Adapter
DIM1
Molex Plugs
DIM2
DIM3
DIM4
DMX-CC-LEN
Fig. 6 - DMX Output Pin Assignments.
9V Wall
On Back Of Panel
Adapter
Molex Connector
AC1
1
4
AC2
6
2
3
PD408-DMX
ADDRESS SELECTORS
LED OUTPUT
MONITORS
OPTIMA-DS2
4 channel logic DMX512
Fade/
Chase
Auto/
Man.
ALL
ON
ALL
OFF
To Port (7)
1 2 3 4
5 6 7 8
or 1-877-264-8391
Specifications are subject to change without notice.
DMX 3 - 8 Channel Controllers
User's Manual - Page 4
INT04
S2
S1
1 2 3 4
To more DMX
Dimmer Packs
Fig. 5 OPTIMA-DS2
Installation Drawing
Pattern
9V Wall
Speed
Adapter
Molex Plugs
XLR Connectors
To DMX
Dimmer Packs
DMX-CC-LEN
Fax: 305-261-6637
Printed in U.S.A.
OSUM
Rev. A 09/01