- ページ 10

IP電話 Cisco 8831のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 8831 14 ページ。 Hard factory reset
Cisco 8831 にも：特徴 (17 ページ), 配備マニュアル (6 ページ), クイック・リファレンス・マニュアル (2 ページ), ユーザーマニュアル (6 ページ), クイック・リファレンス・マニュアル (6 ページ), ユーザーマニュアル (15 ページ), クイック・リファレンス・マニュアル (2 ページ), クイック・スタート・マニュアル (13 ページ), トラブルシューティングマニュアル (3 ページ)

Performance Guidelines

Procedure

Step 1

Connect the power supply to the Cisco DC Adapter port. See the

about powering your conference phone.

Step 2

Connect a straight-through Ethernet cable from the switch to the network port on the conference phone. Each

Cisco Unified IP Conference Phone 8831 ships with one ethernet cable in the box.

You can use either Category 3, 5, or 5e cabling for 10-Mbps connections, but you must use Category 5 or 5e

for 100 Mbps connections.

See

Network Ports, on page 4

Step 3

(Optional) Connect wired extension microphones.

Performance Guidelines

Follow these guidelines to ensure optimum performance with the conference phone and the wired or wireless

extension microphones if they are connected.

• Use the conference phone in closed offices and conference rooms up to 20 feet by 20 feet (without

• Place the conference phone base on a flat surface and make sure that it is clear from any reflective

• Maintain a minimum distance of four feet between each external microphone and the conference phone

• Make sure that all microphones are acoustically unobstructed.

• Position the external microphones toward the areas that need to be covered, and so that the main pickup

• Seat all conference participants the same distance from the conference phone.

• Speak at normal conversation levels and direct your voice toward the conference phone.

• Do not move or handle the conference phone base or the external microphones while on a call, and do

• Minimize background noise from air conditioning units, fans, or other equipment in the office or

Wireless Microphone Menu

The Wireless Microphone menu provides options for setting the pairing and range options for the wireless

expansion microphones. A maximum of two wireless microphones can be paired with the conference station

at a time.

To access the Wireless Microphone menu, navigate to Apps > Admin Settings > Wireless Microphones.

Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager

9.0

for guidelines.

external microphones) and 20 feet by 30 feet (with external microphones).

surfaces.

base and other objects.

direction is pointed away from the conference phone.

not shuffle papers near the equipment.

conference room.

Cisco Unified IP Conference Phone 8831 Installation

Power Guidelines

for more information