- ページ 24

View the Network Status

• Aborted—Remote Customization is aborted due to other provisioning, for example, DHCP options.

• Pending—The phone can not download the profile from the EDOS server.

• Custom-Pending—The phone has downloaded a redirect URL from the EDOS server.

• Acquired—In the profile downloaded from the EDOS server, there is a redirect URL for provision

• Unavailable—Remote customization has stopped because the EDOS server responded with an empty

Procedure

Step 1

Press Settings.

Step 2

Select Status > Product information > Customization.

Step 3

Press Back.

View the Network Status

Procedure

Step 1

Press Settings .

Step 2

Select Status > Network status.

You can view the following information:

• Network type—Indicates the type of Local Area Network (LAN) connection that the phone uses.

• Network status—Indicates if the phone is connected to a network.

• IPv4 status—IP address of the phone. You can see information on IP address, Addressing type, IP status,

• IPv6 status —IP address of the phone. You can see information on IP address, Addressing type, IP

• VLAN ID—VLAN ID of the phone.

• MAC address—Unique Media Access Control (MAC) address of the phone.

• Host name—Displays the current host name assigned to the phone.

• Domain—Displays the network domain name of the phone. Default: cisco.com

• Switch port link—Status of the switch port.

• Switch port config—Indicates speed and duplex of the network port.

Your Phone

configuration. If the redirect URL download from the provisioning server is successful, this state is

displayed.

provisioning file and the HTTP response was 200 OK.

Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.

status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.

Your Phone