- ページ 7

Energy Savings

Your administrator can reduce the amount of power your phone screen uses when you're not using your

phone. Your administrator can set up these energy-saving levels on your phone:

Power Save—The backlight or screen turns off when the phone is inactive for a set interval.

•

Power Save Plus—Your phone screen turns on and off at times that are based on your work schedule.

•

If your work hours or work days change, you can contact your administrator to reconfigure your

phone.

For example, your administrator can set your phone to alert you 10 minutes before it turns off. You see the

Select button light up and you get a message that your phone is turning off soon. You get notifications at

these intervals:

Four rings at 10 minutes before power off

•

Four rings at 7 minutes before power off

•

Four rings at 4 minutes before power off

•

15 rings at 30 seconds before power off

•

If your phone is active, it waits until it has been inactive for a set interval before it notifies you of the

pending power shutdown.

When your phone turns off to save energy, the phone screen is blank and the Select button lights up.

Procedure

Press Select to turn your phone back on.

Your phone can be set up in one of these modes:

Normal line mode—In this mode, the buttons to the left and right of the screen have different

•

functions. Usually, the left buttons are the line buttons and the right buttons are the feature buttons.

The line and feature buttons are reversed for locales that read from right to left. This mode is also

known as session line mode.

Enhanced line mode—In this mode, the buttons on the left and right of the screen can be set up as

•

line buttons. This mode increases the number of phone lines that you can see and use. You see an

alert for an incoming call.