- ページ 18

プロジェクター Epson EB-460のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Epson EB-460 21 ページ。 Interactive ultra-short-throw
Epson EB-460 にも：クイック・スタート・マニュアル (16 ページ)

ページを印刷する

Adjust the vertical slide

Adjust the vertical slide with the two M8 x 35 mm hexagon socket head cap bolts at the bottom of the

setting plate. Tightening the bolts raises the setting plate, and loosening them lowers it.

The projection screen is raised or lowered accordingly.

Adjust the forward/backward slide

Loosen the four screws and adjust the slider of the setting plate.

After you finish making all of the adjustments in steps

Turn off the display of the test pattern

Press the [Esc] button on the remote control or control panel to turn off the test pattern.

Warning

Tighten all screws firmly. If the screws are not tightened firmly, the projector or setting plate

may fall and cause personal injury or property damage.

M8 x 35 mm

hexagon socket

head cap bolts (2)

Screws (4)

, tighten the screws.