- ページ 19

IP電話 Cisco 8865のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 8865 28 ページ。 Multiplatform phones
Cisco 8865 にも： 特徴 (16 ページ), ユーザーマニュアル (24 ページ), ファームウェア移行マスターマニュアル (31 ページ), ユーザーマニュアル (30 ページ), ユーザーマニュアル (23 ページ), マニュアル (44 ページ), マニュアル (43 ページ), マニュアル (14 ページ), インストレーション・マニュアル (39 ページ), 再設定マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), ユーザーマニュアル (13 ページ), クイック・スタート・マニュアル (2 ページ), ユーザーマニュアル (8 ページ), マニュアル (48 ページ), マニュアル (11 ページ), ユーザーマニュアル (40 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する
Cisco 8865 ユーザーマニュアル
Your Phone
Clean the Phone Screen
Procedure
If your phone screen gets dirty, wipe it with a soft, dry cloth.
Caution
Differences Between Phone Calls and Lines
We use the terms lines and calls in very specific ways to explain how to use your phone.
• Lines—Each line corresponds to a directory number or intercom number that others can use to call you.
• Calls—Each line can support multiple calls. By default, your phone supports two connected calls per
USB Ports
Only for Cisco IP Phone 8851 and 8861.
Your phone may have one or more USB ports. Each USB port supports a maximum of five USB devices.
Each device connected to the port is included in the maximum device count.
For example, your phone can support five USB devices on the side port and five additional standard USB
devices on the back port. Many third-party USB products contain more than one USB device, and thus count
as more than one device.
If you use a USB hub and remove the USB cable from the phone during an active call, your phone might
restart.
Related Topics
Mobile Device Charging
You can use the USB ports on your phone to charge your mobile device if the device has a USB connection.
The following ports support USB charging:
Your phone continues to charge the mobile device while it is in power saving mode.
When you use your phone to charge your mobile device, the following conditions apply:
• A short delay may occur before charging begins.
Do not use any liquids or powders on the phone because they can contaminate the phone components
and cause failures.
You have as many lines as you have directory numbers and phone line icons.
line, but your administrator can adjust this number according to your needs.
Only one call can be active at any time; other calls are automatically placed on hold.
Here is an example: If you have two lines and each line supports four calls, then you could have up to
eight connected calls at one time. Only one of those calls is active and the other seven are held calls.
The Cisco IP Phone 8800
Series, on page 1
Clean the Phone Screen
Your Phone
19