- ページ 11

IP電話 Cisco 8865NRのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 8865NR 44 ページ。 Add buttons to your phone
Cisco 8865NR にも：ユーザーマニュアル (24 ページ), マニュアル (14 ページ), マニュアル (11 ページ), クイック・スタート・マニュアル (2 ページ)

Your Phone

Step 2

Press Applications

Step 3

Navigate to Admin settings > Network setup > Wi-Fi client setup > Wi-Fi sign in access.

Step 4

Navigate to Wireless and press On.

Step 5

Navigate to Wi-Fi sign in access and press On.

Step 6

Press Apply to save the changes, or press Revert to cancel the changes.

Connect to a Preconfigured Wi-Fi Network

You can connect to a Wi-Fi network with your Cisco IP Phone 8861 and 8865. But the Cisco IP Phone 8865NR

does not support Wi-Fi.

Depending upon how your phone is configured, you could be required to sign in when you join a Wi-Fi

network or when your phone powers up.

You cannot dismiss the Wi-Fi sign-in window without entering the correct username and password.

Procedure

Step 1

Enter your Wi-Fi credentials when prompted.

Step 2

Select Sign-in.

Connect to a VPN

You connect to your VPN in one of two ways:

• By entering credentials (username and password, or just a password)

• With a certificate

If you have a certificate installed on your phone, you do not need to do anything. Your phone automatically

connects to the VPN.

Procedure

Step 1

When prompted, enter your VPN credentials.

Step 2

Select Sign-in.

Set up a Phone for Use with VPN

Before you begin

To complete this procedure, you must have a valid TFTP server address. If you do not have this information,

contact your administrator.

You cannot use the Wi-Fi client with the Cisco IP Phone 8865NR.

Connect to a Preconfigured Wi-Fi Network

Your Phone