- ページ 5

IP電話 Cisco Catalyst 4000のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Catalyst 4000 18 ページ。 For cisco business edition 4000
Cisco Catalyst 4000 にも：インストールの準備 (11 ページ), クイック・スタート・マニュアル (8 ページ), スタートマニュアル (31 ページ), エンドユーザマニュアル (6 ページ), エンドユーザマニュアル (6 ページ)

ページを印刷する

For complete configuration information, refer to the Cisco Product Catalog, which is

available on the Web at http://www.cisco.com.

Table 1-1 lists the network processor module interface options available for the Cisco 4000

series when this guide was printed. For current modules, see the configuration note packet

that shipped with your router.

Interface Options

Ethernet

Fast Ethernet

Synchronous serial

Synchronous/asynchronous

serial

HSSI

Token Ring

Multimode FDDI

Single-mode FDDI

BRI

G.703

Channelized T1/ISDN PRI

Channelized E1/ISDN PRI

ATM

1. Each low-speed port can be individually configured for synchronous or asynchronous.

2. For G.703 and G.704 connections, balanced or unbalanced ports must be matched with the corresponding

balanced or unbalanced cable.

Table 1-1 lists the specifications of the Cisco 4000 series routers.

Port Options

Single port, dual port, or six port

Single port

Dual port or four port

Dual high-speed ports and

16 low-speed ports

Single HSSI port

Dual port or single port

Single attachment or dual attachment NP-1F-D-MM=,

Dual attachment

Four port or eight port

Four port (balanced or unbalanced)

Single channelized T1/PRI port

Single channelized E1/PRI port

Single ATM port

Overview of the Cisco 4000 Series Routers 1-5

Series Specifications

Part Numbers

NP-1E=, NP-2E=, NP-6E=

NP-1FE=

NP-2T=, NP-4T=

NP-2T16S=

NP-1HSSI=

NP-1RV2=, NP-2R=

NP-1F-S-M=

NP-1F-D-SS=

NP-4B=, NP-8B=

NP-4GB=, NP-4GU=

NP-CT1=

NP-CE1=

NP-1A-SM=,NP-1A-MM=

, NP-1A-DS3=,

NP-1A-E3=