- ページ 3
IP電話 Cisco Catalyst 4000のPDF エンドユーザマニュアルをオンラインで閲覧またはダウンロードできます。Cisco Catalyst 4000 6 ページ。 For cisco business edition 4000
Cisco Catalyst 4000 にも： マニュアル (18 ページ), インストールの準備 (11 ページ), クイック・スタート・マニュアル (8 ページ), スタートマニュアル (31 ページ), エンドユーザマニュアル (6 ページ)
ページを印刷する
Tasks on Phone Device (Continued)
Add Another Person to a Call
1. From a connected call that is not on hold, press
Conference
.
2. Press Active calls to select a held call and press
Conference again to join the calls.
Forward All Calls
1. Select a line and press Forward all.
2. Dial the number that you want to forward to, or press
Voicemail.
3. To receive calls again, press Forward off.
Update Single Number Reach
You can edit the Single Number Reach (SNR) number from
the phone only if SNR is configured on the Selfcare Portal.
For detailed steps on configuring SNR, refer
Single Number
Reach" on page 5.
1. Press Applications
.
2. Scroll through the options to My Phone Apps and
press Select.
3. Scroll through the options to Single Number Reach
and press Select.
4. Enter the lead digit to dial an outside line followed by
the phone number.
Contact your network administrator to know the lead
digit configured to dial an outside line.
Example: If 9 is the digit to dial an outside line, 1 is the
country code, 555 is the area code, and 9999999 is
the subscriber number, you must enter 915559999999.
5. Press Submit.
Copyright © 2018 Cisco Systems, Inc. All rights reserved.
Cisco Business Edition 4000 End User Guide
Park a Call
1. From a connected call, press Transfer
2. Dial * and the extension where you want to park the
call.
Example: If you want to park the call on extension
4501, dial *4501.
3. Press Transfer
Retrieve a Parked Call
1. From any phone, dial *0* and the parked extension.
Example: Dial *0*4501 to retrieve the call parked on
extension 4501.
2. Pick up the handset.
Page All
"Configure
1. Dial 70999.
2. Speak out the paging message.
The message is played in speaker mode on all the
phones.
.
again.
Transfer a Call to Voicemail of another
Extension
From a connected call, dial the lead digit and the extension
to which you want to transfer the call as a voicemail.
The call is transferred directly to the voicemail of the dialed
extension without ringing on the phone.
Contact your network administrator to know the lead digit
configured for transferring a call to voicemail of another
extension.
Configure a Personal Speed Dial Directory
Entry
Personal Speed Dial entries can be accessed via the
Directory button under Personal Speed Dials.
1. Press Applications
.
2. Select My Phone Apps > Personal Speed Dial.
3. Press Add.
4. Enter the label and number.
5. Press Submit.
6. Press Exit until you reach My Phone Apps screen.
7. Select Reset.
April 2018