- ページ 7

IP電話 Cisco Expansion Module 7914のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Expansion Module 7914 33 ページ。 Expansion module cme
Cisco Expansion Module 7914 にも：システムマニュアル (50 ページ), システムマニュアル (36 ページ), 電話マニュアル (33 ページ), クイック・スタート・マニュアル (2 ページ)

Remove the Footstand from the

Cisco IP Phone 7960G

Refer to Figure 2 and the steps that follow.

Figure 2

Removing the Footstand

Unplug the Cisco IP Phone 7960G network and power

Step 1

connections.

Unplug the handset, and unplug the headset if one is

Step 2

attached to the phone.

Turn the Cisco IP Phone 7960G over and lay it on a

Step 3

protected flat surface to prevent it from being

scratched.

Locate the two foot pins on the footstand.

Step 4

Use a flat head screwdriver to carefully push on one of

Step 5

the foot pins to release it. Then carefully push on the

other foot pin to release it.

Note

You may have to lift and hold the

Cisco IP Phone to support it when pushing the

foot pins. When pushing on the footpins, push

away from your body.