IP電話 Cisco Poly TRIO C60のPDF 再設定マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Poly TRIO C60 2 ページ。

Poly TRIO C60 Manual Reconfiguration Procedure

WARNING: THIS PROCEDURE DESCRIBES HOW TO MANUALLY RECONFIGURE A POLY TRIO C60 IP DEVICE

TO WORK ON THE BROADSOFT BROADCLOUD PBX NETWORK. ONCE THIS PROCEDURE HAS BEEN

COMPLETED, ANY PRIOR CONFIGURATION SETTINGS ON THE DEVICE WILL BE OVERRIDDEN, INCLUDING

THE ADMINISTRATOR PASSWORD, AND THE DEVICE WILL ONLY BE USABLE ON THE BROADSOFT

BROADCLOUD PBX NETWORK. THE DEVICE MUST BE RETURNED TO THE POLYCOM FACTORY DEFAULT

CONFIGURATION BEFORE IT CAN BE USED ON ANY NETWORK OTHER THAN BROADSOFT BROADCLOUD

PBX.

Reset the phone to Factory Defaults before continuing.

1. Touch the Home icon on the touchscreen

2. Select "Settings" by touching the corresponding icon on the screen

3. Select "Advanced" by touching the corresponding icon on the screen

4. At the password prompt, enter key in 456 then press the green Enter tick icon.

Note:

• If the password is a known value other than 456, then enter that value instead

• If the password is not 456 and the actual password is not known, then the remainder of

this procedure cannot be performed, and the device cannot be modified for use in the

BroadSoft BroadCloud PBX network.

5. On the touchscreen, select "Administration Setting"

6. On the touchscreen, select "Network Configuration"

7. On the touchscreen, select "Provisioning Server"

8. On the touchscreen, select "DHCP Menu"

9. On the touchscreen, select "Boot Server"

10. On the touchscreen, select "Static"

11. Touch "Return" arrow to return to the "Provisioning Server" menu

13. On the touchscreen, select "Server Type:"

14. On the touchscreen, select "HTTPS" and back to "Provisioning Server" menu

15. On the touchscreen, select "Server Address:"