- ページ 18

オール・イン・ワン・プリンター Ricoh AFICIO 1055のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ricoh AFICIO 1055 28 ページ。 System settings
Ricoh AFICIO 1055 にも：マニュアル (12 ページ)

ページを印刷する

User Tools (System Settings)

ADF Orig. Ejection

<F/F4>Size Setting

Basic Page 2

System Reset

Function Priority

Copy/Document Server:

Output Tray

Description

As a default setting, the scanned originals from the document

feeder are ejected to the ADF external tray. If there is no space to

attach an ADF external tray, you can change the output tray to the

ADF tray. However, if the output tray is set to the ADF tray, it

takes a little more time than to the ADF external tray.

Note

❒ Default: ADF Ext. Tray

❒ Even if the ADF external tray is set, papers are ejected to the

ADF tray in 2 Sided → 2 Sided copy mode.

Currently three types of F size are available; 8

and 8" × 13".

The document feeder or platen cover sensor cannot distinguish

these 3 types of originals.

This function sets the F size from the document feeder or platen

cover sensor.

Auto Paper Select or Auto Reduce/Enlarge can be used for F size

originals based on this setting.

Note

❒ Default: 8

" × 13" L

Description

If no operation is performed for a selected time after interrupt cop-

ying, the interrupt copying will be canceled. This function is called

"System Reset". The time can be set from 10 to 999 seconds, or 0.

Note

❒ Default: 60sec.

❒ When the time is set to "0", System Reset will not be activated.

You can specify the mode that is displayed when the operation

switch is turned on or System Reset is activated.

Note

❒ Default: Copy

You can specify a tray to which documents are delivered.

Note

❒ You can select from "Copy tray", "Finisher Shift Tray", "Fin-

isher Proof Tray".

❒ Without the optional finisher installed, "Copy tray" is the only

output tray that can be used.

" × 13", 8

" × 13"