オール・イン・ワン・プリンター Ricoh SP C250SFのPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Ricoh SP C250SF 4 ページ。 Color laser printer. color laser mfp
Ricoh SP C250SF にも： 仕様 (4 ページ)
ページを印刷する
Wi-Fi Settings Guide
This manual explains how to establish a wireless LAN connection in infrastructure mode (for
connection through an access point (router)).
❖
Infrastructure mode
This section explains how to connect to the network via a wireless LAN access point (router) as
shown below.
The settings
To be confi gured.
are complete.
Computer
Access point (router)
•
For details about confi guring ad hoc mode, see "Wireless LAN Setup" in the Operating
Instructions .
Check Your Wireless Network Environment
(1) Selecting the Confi guration Method
•
Make sure your access point (router) is connected to the network.
The confi guration method depends on the access point (router) being used.
"WPS" is a function for automatically confi guring the wireless LAN settings.
Does the device support WPS (W-Fi Protected Setup)?
Yes
Is there a WPS button
on the access point (router)?
Yes
No
Easy Setup Using
Easy Setup Using
the WPS Button
a PIN Code
•
About the WPS button and connection using a PIN code
•
Depending on the access point (router) used, setup may be possible using either the WPS
button, a PIN code, or both methods.
•
To establish a connection using a PIN code, the confi guration screen of the access point
(router) must be displayed on the computer.
•
About WPS connection security
The encryption method for the devices is automatically confi gured by WPS.
Security settings depend on the connection environment. Accordingly, it cannot be assumed that
the confi gured security setting is the most secure.
❖
Glossary of Wireless LAN Terms
•
Wireless LAN Access Point (Router)
This device routes data between wireless
LAN-capable devices and the Internet.
•
Infrastructure Mode
Select this to communicate via an access
point (router).
•
Ad-Hoc Mode
Select this to connect directly to a device
equipped with wireless LAN (such as a
laptop).
•
WPS (Wi-Fi Protected Setup)
WPS is a standard for encryption settings
for connections between devices that support
Machine
Wi-Fi.
Devices that support this standard can be
connected easily using a wireless LAN with
encryption.
•
PBC
A WPS connection method using a push
button.
•
PIN
A WPS connection method using a PIN
code.
•
SSID
This is a network identifi er for
differentiating one wireless LAN access
point (router) from another. It is also called
the network name or access point name.
•
WEP key/Passphrase
This is the password for accessing the
wireless LAN access point (router). It is also
called the network key or encryption key.
(2) Enabling Wireless LAN
Turn on the machine.
No
Press the [User Tools] key.
Manual Setup
DAC522
Press the [ ] or [ ] key to
select [Network Settings], and
(3) Confi guring the IP Address Set-
then press the [OK] key.
tings
Before confi guring the wireless LAN settings,
confi gure the machine's IP address.
•
If you are requested to enter a
password, enter the password
using the number keys, and then
press the [OK] key.
Press the [ ] or [ ] key to
select [Wi-Fi Confi guration],
and then press the [OK] key.
Select [Wi-Fi], and then press
the [OK] key.
.
Press the [ ] or [ ] key to
select [Active], and then press
the [OK] key.
Press the [User Tools] key to
return to the Initial screen.
If you are requested to restart
the machine, turn off the
machine, and then turn it back
on.
DAC509
•
A password for accessing the [Admin. Tools]
menu can be specifi ed in [Admin. Tools
Lock].
Press the [ ] or [ ] key to
select [Active] to automatically
obtain the IP address or
[Inactive] to specify the IP
address manually, and then
press the [OK] key.
If you have selected [Active], proceed to
For details about confi guring the IPv6
Step 13.
address, see the Operating Instructions .
Press the [ ] or [ ] key to
Press the [User Tools] key.
select [IP Address], and then
press the [OK] key.
Enter the machine's IPv4
address using the number keys,
and then press the [OK] key.
DAC509
Press the [ ] or [ ] key to
select [Network Settings], and
then press the [OK] key.
Press the [ ] or [ ] key to move
between fi elds.
Press the [ ] or [ ] key to
select [Subnet Mask], and then
If you are requested to enter a
press the [OK] key.
password, enter the password
using the number keys, and then
Enter the subnet mask using the
press the [OK] key.
number keys, and then press the
[OK] key.
Press the [ ] or [ ] key to
Press the [ ] or [ ] key to move
select [IPv4 Confi guration], and
between fi elds.
then press the [OK] key.
Press the [ ] or [ ] key to
select [Gateway Address], and
then press the [OK] key.
Enter the gateway address using
the number keys, and then press
the [OK] key.
Press the [ ] or [ ] key to
select [DHCP], and then press
Press the [◄] or [►] key to move
the [OK] key.
between fi elds.