ページを印刷する
Specified operating environment
Physical specifications
• Dimensions in base configuration:
– Width: 720.0 mm (28.3 in)
– Depth: 400.0 mm (15.8 in)
– Height: 350.0 mm (13.8 in)
– Weight: 33.0 kg (72.6 lbs)
• Cabinet Printer Stand, black (#4472, 4473)
– Top surface width: 726 mm (28.6 in)
– Top surface depth: 411 mm (16.2 in)
– Top surface height: 775 mm (30.5 in)
– Weight: 44.5 kg (98.1 lb)
– Footprint with Output Tray attached: 726 mm (W) x 792 mm (D) or 28.6 in wide x 31.2 in
deep
• Open printer stand (#4470, 4471) dimensions are:
– Top surface width: 28.5 in (724 mm)
– Top surface depth: 16 in (406 mm)
– Top surface height: 28 in (711 mm)
– Weight: 63 lb (28.6 Kg)
– Footprint with output tray attached: 28.5 in (72.4 cm) x 32 in (81.3 cm)
Operating environment
Paper handling:
• Continuous forms
The 4247-Z03 will handle up to 8-part continuous forms in either front paper path.
For the tractor paths:
– Form weight can range from 56 grams per square metre (gsm) (15 lb) to 150 gsm (40 lb).
Paper weights outside this range must be tested by the customer for proper operation.
– Overall (total) form thickness for all parts may range from 0.08 mm (0.003 in) to 0.64 mm
(0.025 in).
The following forms widths and lengths are supported:
– Form width from 76.2 mm (3 in) to 431.8 mm (17 in)
– Form lengths from 76.2 mm (3 in) to 609.6 mm (24 in)
Forms less than 152.4 mm (6 in) in length or width should be tested for satisfactory stacking
and may require operator assistance.
Input voltage required
Input voltages required for 4247-Z03 Universal Power Supply:
100 - 127 V ac single-phase grounded 50/60 Hz
200 - 240 V ac single-phase grounded 50/60 Hz
Printer heat output
Maximum estimated heat output:
115 volt, 60 Hz: 500 BTU/hr or 147 Watts
230 volt, 50 Hz: 480 BTU/hr or 141 Watts
InfoPrint Solutions Company Canada Hardware
Announcement A08-1078
InfoPrint is a registered trademark of Ricoh Co., Ltd.
11