- ページ 5

プリンター Ricoh Aficio 1050のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ricoh Aficio 1050 36 ページ。 Sap printing
Ricoh Aficio 1050 にも：マニュアル (12 ページ)

Bell105sysGB-FIN_FM.book Page 1 Wednesday, April 19, 2000 11:13 AM

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get

maximum versatility from this machine all operators should carefully read and follow the instructions in

this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information before using this machine. It contains important information related

to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes

Some illustrations might be slightly different from your machine.

Certain options might not be available in some countries. For details, please contact your local dealer.

Operator Safety:

This machine is considered a class 1 laser device, safe for office/EDP use. The machine contains a

GaAIAs four beam laser diodes array, 10-milliwatt, 770-810 nanometer wavelength for each emitter.

Direct (or indirect reflected ) eye contact with the laser beam might cause serious eye damage. Safety

precautions and interlock mechanisms have been designed to prevent any possible laser beam expo-

sure to the operator.

The following label is located on the internal cover that is revealed when the front cover is opened.

Laser Safety:

The optical housing unit can only be repaired in a factory or at a location with the requisite equipment.

The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser chassis is

not repairable in the field. Customer engineers are therefore directed to return all chassis and laser sub-

systems to the factory or service depot when replacement of the optical subsystem is required.

Warning:

Use of controls or adjustment or performance of procedures other than those specified in this manual

might result in hazardous radiation exposure.

Notes:

The model names of the machines do not appear in the following pages. Check the type of your ma-

chine before reading this manual. (For details, see ⇒ P.2 "Machine Types" )

•

Type 1 : 2885

•

Type 2 : 28105

Certain types might not be available in some countries. For details, please contact your local dealer.

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good copy quality, Rex-Rotary recommends that you use genuine Rex-Rotary toner.

Rex-Rotary shall not be responsible for any damage or expense that might result from the use of parts

other than genuine Rex-Rotary parts in your Rex-Rotary office product.

Power Source

•

Type 1 : 220 - 240V, 50/60Hz, 10A or more

•

Type 2 : 220 - 240V, 50/60Hz, 12A or more

Please be sure to connect the power cord to a power source as above. For details about power source,

see "Power Connection" of the "Copy Reference" manual.

Read this manual carefully before you use this product and keep it handy for future reference.

For safety, please follow the instructions in this manual.