プリンター Ricoh Aficio AP4510のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Ricoh Aficio AP4510 4 ページ。 Sap printing
Ricoh Aficio AP4510 にも：取扱説明書 (32 ページ), 交換マニュアル (2 ページ), インストール手順 (2 ページ), 補足マニュアル (38 ページ), マニュアル (12 ページ), クイック・インストール・マニュアル (2 ページ)

ページを印刷する

G065-8539

Printer Hard Disk Type 4510

(Code: G065)

For Machine Code: G065

INSTALLATION GUIDE

Preparation

For a safe operation, read "Safety

Information" in the Setup Guide.

R CAUTION:

• Do not touch the inside of the

printer board compartment. It

may cause a machine malfunc-

tion or a burn.

Important

❒ Check the printer nameplate to

confirm the model code.

❒ The Printer Hard Disk can be dam-

aged by a small amount of static

electricity. You should touch some

metal to discharge static electricity.

❒ When the bidirectional transmis-

sion is not in operation, you must

set up the installed hard disk drive

using the printer driver in order to

use it. See the Setup Guide for set-

ting up options. See the Setup

Guide for information about bidi-

rectional transmission.

❒ When the Printer Hard Disk is be-

ing accessed, the Data In indicator

blinks. Do not turn off the printer

power when the Data In indicator

is blinking as it may destroy the

hard disk.

❒ When a print job is being spooled,

the printer sends data to the hard

disk, and the Data In indicator

blinks. Do not turn off the printer

or computer while a print job is be-

ing spooled, as it may destroy the

hard disk or the spooled job will

remain in the hard disk and be

printed repeatedly until erased.

Check the contents of the box for

the following items:

• Printer Hard Disk

• Installation Guide

• Power Cord

• Connector

Turn off the printer.

Pull out the first paper tray (Tray

1) and take the screwdriver (A A A A )

from the tray. Each screw to be re-

moved requires this screwdriver.